Repairing the drywall might seem like a simple task to do, but it always ends up coming with its fair share of challenges. The thing to keep in mind is to have the right tools ready and know what steps you need to go through. Every little issue you encounter can end up being problematic if you’re not careful.
Check for wires
Before you remove drywall completely, do it nice and easy so you can figure out where your wires are. also, your electricity should be down in this situation, just to be safe. Check for wires slowly and avoid cutting the piece of drywall right away. That’s what most contractors do anyway.
Add the back boards and tape the joints
Now that you removed the damaged piece of drywall, your focus has to be on adding the backer boards. They should be around 4 inches longer when compared to the hole height, just to be safe. Hold them to the drywall backside just to make sure you add them properly and screw them in. Once you did that, you want to tape the joints. Add a bed of patch drywall compound over the joints and put some paper tape in there just to be safe too. Once you do that, apply a small layer of compound right on the tape just to be safe here.
Applying 2 more coats
You will need to apply a second coat and draw it around 6 inches beyond the first coat’s edge as this will help you taper the repair edges. The third coat will help smooth the uneven areas. Lastly, you want to sand the dry compound. Sanding is essential because it will help you remove all the blend edges and ridges that can appear during the process. Once it’s all good you can go ahead and prime it, then you can choose to paint it too. It will help you quite a bit and the results you will receive will be very impressive.
Hire the best Dallas contractors
If you can’t remove drywall or patch it properly, it’s important to work closely with professionals to solve that problem. The reason is simple, not only can you do this properly without worries, but the results are a lot better in the end too. The most important aspect is making sure that you take all the safety protocols into consideration.
Removing drywall and replacing it adequately is not the most complex task, but a lot of things can go wrong. There are various hazards to deal with, and that’s why you need to be extremely careful when dealing with something like this. If you’re not careful, it can be very problematic, so handling this correctly is pretty much mandatory. The best Dallas painters and contractors will have no problem solving the issue, so try to take that into consideration and you will be incredibly impressed with the results and value every time. This is a very important process and it can make a huge difference!