You can do this with a drywall knife or utility knife. It gets the job done pretty fast and then you won’t have a problem handling it at the best possible level. Sometimes it also needs to be removed with a coat of joint compound, as that will help remove some, if not all, of the blemishes. Adding a good layer of warm water to the popcorn roof will go a long way, as it can remove it a bit more easily. Let it sit for about 15 minutes so that it absorbs everything properly. Once done, sand and smooth before choosing to repaint. The challenge here is that the whole process can be time-consuming, but you have to do it carefully as you only have to complete it once and you are good to go.
Cover with Drywall
After removing the popcorn ceiling, you will need to install a ceiling plasterboard. This drywall is great because it allows you to protect your ceiling while still looking great. You should also make sure to screw it onto the frame and tape it down to make it look like new. This type of process works very well and will give you a very good and complete experience at all times. Roof repair can take a bit of time, so patience is needed in a situation like this.
Top Tips to Keep in Mind
Most Dallas painters tend to use a rooftop popcorn bucket to keep the mess from ending up on the floor. Some even go further and use plastic sheeting for the entire floor. It is the best approach because it helps you protect the floor and at the same time you can work without restrictions. You may want to wear a dust mask or even a respirator, as it will help you achieve the results you hope for.
One thing is for sure, removing popcorn ceilings can be a challenging task, but it also has its fair share of challenges. We recommend that you give it a try, and you will find that it offers an excellent and rewarding experience. Removing popcorn tops isn’t easy, but if you’re patient and committed to the process, it can work for you! If not, you can easily hire Dallas contractors to help you solve the problem!